Cute Monsters Keychains - Set of 4 - No AMS needed

4 Different designs of Cute Monsters made as keychains

If you don’t have a multi-color printer, you just need to set a pause at layer 11 when slicing this file. When the printer stops at layer 11, change the filament to white.

The Print profile is made for AMS users and has allready set color change at layer 11. If you dont have the AMS, just move the layer height slider to layer 11, right click and press “Delete filament change”, then press right button again and press “Add pause”

Start with black, then switch to white.

-I recommend setting your printer to a slow speed (up to 100 mm/s) to avoid messing up the small details.

-I’ve printed all my designs in both PLA and PETG, but I recommend PETG. If you leave your keys in a hot car, you don’t want your keychain to deform from the heat, which could happen with PLA.

All designs shared here are created for hobby purposes only. I do not sell these designs, nor do I grant anyone the license to sell them. These designs are provided for free to the community for personal, non-commercial use only.

Enjoy!