Mac Pro Case for the M1/M2 Mac Studio and Mac mini

11/21/2024 UPDATE:

• Updated to include a version of the main case without front I/O for the 2010-2024 M1-M2 Mac Mini.
• Added alternate side cover plate with spacer for M1-M2 Mac mini. The extra volume is left open at the backside for an external SSD or hub.
• Tweaked tolerances on printable tires and feet. 
• Adjusted supports
• Wheel hubs and axles are compatible with 6902-2RS ball-bearings
• Begun working on a solution for using F9-20M thrust bearings to enable castering the wheels directionally around their vertical axis. This is not ready yet.

 

Mac Studio Pro - a Mac Pro Enclosure for the M1/M2 Mac Studio and M1/M2 Mac mini

Well, you asked for it, and I gave it a try... You all were right – this really completes the collection!

 

Here's the whole family:

• "Mac mini Pro" - for M4 Mac mini
• “Mac Studio Pro” - for M1/M2 Mac Studio and M1/M2 Mac mini
• “iPhone XDR” - for MagSafe and StandBy mode
• "M4 Cube" - for M4 Mac mini
• Mac Pro Desk Model - standalone 3D printable display model

This design is a larger version of my popular M4 “Mac mini Pro” enclosure, this time sized for the M1 and M2 Mac Studio form factor. A happy side effect is that this should also allow the M1/M2 Mac mini to fit as well – I will need to provide a basic spacer to make up the height (stand by).

 

Note, this is a considerably larger print, and now requires a 256mm-class bed size (P1S, P1P, X1C, A1 etc). It may also be somewhat challenging to avoid warping due to its size. I will put together some recommendations on how to best mitigate this.

 

The slightly different aspect ratio of the Mac Studio actually makes this an easier print in terms of orientation, as it is now more appropriate for the Mac to slide into the enclosure from one of the flat sides rather than from the back. The result is a shorter print with fewer necessary supports. I provide a simple cover for the opening in the side, so that the Apple logo can remain upright.

 

Provided initially in this release is just the feet and printed wheels – I will adjust the design for a new ball-bearing (size 6902-2RS) shortly.

 

Boost MePlease consider boosting my projects -- it really supports my ongoing design efforts on these and other works, like my work on the Modular Wind Tunnel for STEM Education (available at Printables).

 

Previous Updates

11/20/2024 UPDATE

• If you intend to print this with wheels (printed or bearing-based), please hold off for another day or two. I am currently working on tweaking the wheel fitment and tolerancing. The next version I upload will include ball-bearing wheels that (1) fit better than the 11/17 upload and (2) rotate around their axes like proper casters (likely using a thrust bearing in the main-case body). This is coming along but still needs another couple design iterations – thanks for your patience.

   

11/18/2024 UPDATE

• The main print profile here has been updated to correct an incorrect front I/O port location. Thanks to Max on threads for the kind tip to the error!
• An LED port opening was also added. 

11/17/2024 UPDATE

• I have begun offering commercial licenses for sale of physical prints of these and other related prints. You can find more information on my Patreon page. Note there are currently no authorized licensees – prints you may see on Amazon, Etsy, Shopify and others are unauthorized uses of this intellectual property. I will update the post here with licensed printing partners once they are available.
• Personal prints for non-commercial use, are, of course, still 100% free as normal.'

 

Related models for Mac Studio and M1-M2 Mac mini:

• “Mac Studio Pro” enclosure, (à la 2019+ Mac Pro)
• Gridfinity Hats"

Related models for M4 Mac Mini:

• "Mac mini Pro" enclosure, (à la 2019+ Mac Pro)
• “Mac mini Trash Can” enclosure, (à la 2013-2019 Mac Pro)
• “Mac mini G5” enclosure, (à la 2003-2006 PowerMac G5 or 2006-2013 Mac Pro)
• "M4 Cube" enclosure, (à la PowerMac G4 Cube, modernized)
• Nintendo NES enclosure
• Mac App Icon and Logo “Hats” 
• "Gridfinity Hats”
• Santa Hat

Related models, other:

• “iPhone XDR” - for MagSafe and StandBy mode
• Mac Pro Desk Model - standalone 3D printable display model