Simple Catch All Trays

I created a set of 14 easy to print catch all trays with a few variations. There are small, medium and large sizes. These each have 4 varieties: flat top edge with and without dividers and round top edge with or without dividers. The large size has 2 additional configurations with 6 divided sections. All models are visible in the photos above.

 

Internal edges are curved to make it easy to retrieve items from the dish. The model has recesses for rubber feet (optional). I'm using these: https://a.co/d/5YhGR4G

 

The sample prints in the photos are the small, medium and large flat top edge models. Printed with PolyTerra PLA in Wood Brown. I've reduced the printing speeds in the attached profile to get the best quality at a reasonable speed.

 

Small Tray Dimensions: 113mm x 113mm x 17mm

Medium Tray Dimensions: 138mm x 138mm x 17mm

Large Tray Dimensions: 163mm x 163mm x 17mm

 

I also have a related Simple Jewelry Dish model available here: https://makerworld.com/en/models/794170#profileId-733050

Boost MeIf you like this model consider boosting it. It’s free for you!