Eldest cover

Cover art for Eldest, one of my favorite books of all time!

Two profiles, one without magnets and one with, slots sized for 3/4" Long x 3/8" Wide x 1/32" Thick Rectangular Plate shaped magnets

“Atra esterni ono thelduin. Atra du evarínya ono varda. Un atra mor'ranr lifa unin hjarta onr.”

Project: Eldest cover.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x248.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Scarlet Red
At layer #16 (1.36mm) swap to Dark Red
At layer #17 (1.44mm) swap to Jade White for the rest.