November 17, 2024
Description
UPDATE:
The sensors now ship with the TH05Y_V3.1 PCB. The PCB has a CHT8320 sensor that requires THB2 Version 2.0 to be used.
The flash adapter has been tested with this new PCB version and still works fine!
==========================================================================================
Flash adapter for the TH05-F type (TH05Y_V1.1 and TH05Y_V1.2) bluetooth thermohygrometers.
With a bit of adaption (I think the battery pins are different, see: https://pvvx.github.io/TH-05/ vs. https://pvvx.github.io/TH05F/) this might work for TH-05 too.
The Tuya based thermometers can be obtained from Aliexpress for around 3 Euros and offer BTHome protocol support through the great THB2 Firmware: https://github.com/pvvx/THB2
The adapter uses five P50-B1 pogo pins for contact. As long as the pogo pins are around 0.7 mm in diameter, they should fit. Just glue them in place with superglue.
The print profile included was tweaked a bit to get the hole sizes right and make the inside contour big enough to acommodate the PCB.
Also see my wall mount plate for push pins/nails/screws for the TH05 Thermohygrometers:
License:
Standard Digital File License
NoodleExtruder
