3.2 Hour Christmas Snow Village

Christmas Snow Village

AMS Ready - Color changes can be manually swapped.

Scale up or down on X/Y axis only. DO NOT adjust Z height!

If you get “floating regions” warning, that can safely be ignored and does not required supports.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x147mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White for the rest.

Any questions or requests, please ask!

Hueforge Easle by @3Dingo

Please leave a review!