Christmas trees (tealight compatible)

Modern christmas tree ornaments for vase mode printing. Tall tree is 174mm tall and short tree 132mm and both have a 62mm opening for the bambulab remote controlled puck lights or an electronic tealight. Designed for vasemode printing. Profiles are tuned to get a good print quality with variable layer heights. When using translucent filament you can use a light to light up the tree. Model is compatible with Bambulab LED Flame Tea Light Candle Set and remote controlled puck light.

When slicing yourself and using larger layer heights there may be gaps in the print because of the steep curvature on the model. Thus it is recommended to use 0.20 mm overall layer height with lower variable layer heights on the tip and the top curvatures of each section of the tree.

 

If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign

 

For one time support you can also buy me a coffe here: https://buymeacoffee.com/sabredesign

 

Boost Me

 

Check out more of my designs below and on my profile: