1.2 Hour! Funny Hockey Zamboner Vintage Ornament

Funny - Hockey Gives me a Zamboner Vintage Ornament!

Perfect as a gift for someone who loves hockey!

Just add hook or tie to hang from your Christmas tree!

For a 5 color change, read below for changing to 5th color!

AMS Ready - Color changes can be manually swapped.

Scale up or down on X/Y axis only. DO NOT adjust Z height!

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Cyan Transmission Distance: 6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Cyan
At layer #17 (1.44mm) swap to Brown
At layer #20 (1.68mm) swap to Jade White for the rest.

If you want a black and white profile I will add!

If you do not want the ring at the top, simply use the “split” feature in the slicer and delete the ring.

To change to 5th color, simply add a pause by right clicking mouse after slicing. See below. A pause has been implemented at layer 19 for ease. If you do not want the pause, just delete the pause after slicing and re-slice!

Step 2. Pick the 5th color (White) and choose the AMS slot for black. During the pause, or when black is done, simply swap that out for white, and TADA! Easy as pie!

Please leave a review! Thanks!