4mm SKADIS Peg Screwdriver (fits ifixit)

A quick print for the ifixit toolkit bits or other 4mm bit sets which is designed to work with the IKEA SKADIS board. Its a tiny screwdriver that fits into a SKADIS board. Spare bits fit into the mini or micro screw driver and slot right into the SKADIS pegs. Useful for keeping that one bit near your workstation, or if you want to store a single spare bit somewhere it could be used.

Prints with no support with standard PLA.

IMPORTANT: First time use it you'll want to prime the hole with a bit first. You WILL want to have pliers on hand but it should fit better after pressing the bit in and removing it a couple times. Profile uses a .1 mm layer height since the tolerance levels are so low for the 4mm bits.