HueForge Samurai / Frame included

If you rezise for a mini, DO NOT change the Z height!!!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA ZIRO Black matte Transmission Distance: 0.1
PLA Overture Super Grey Transmission Distance: 0.5
PLA ZIRO White matte Transmission Distance: 3.5
PLA eSun Fire Engine Red Transmission Distance: 3.1

This print uses 4 unique filaments

Swap Instructions:
Start with Black matte
At layer #6 (0.56mm) swap to Grey
At layer #7 (0.64mm) swap to White matte
At layer #14 (1.2mm) swap to Fire Engine Red for the rest.