• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Voice Assistant Case 3D Printer File Image 1
Voice Assistant Case 3D Printer File Image 2
Voice Assistant Case 3D Printer File Image 3
Voice Assistant Case 3D Printer File Image 4
Voice Assistant Case 3D Printer File Image 5
Voice Assistant Case 3D Printer File Image 6
Voice Assistant Case 3D Printer File Image 7
Voice Assistant Case 3D Printer File Image 8
Voice Assistant Case 3D Printer File Image 9
Voice Assistant Case 3D Printer File Image 10
Voice Assistant Case 3D Printer File Thumbnail 1
Voice Assistant Case 3D Printer File Thumbnail 2
Voice Assistant Case 3D Printer File Thumbnail 3
Voice Assistant Case 3D Printer File Thumbnail 4
Voice Assistant Case 3D Printer File Thumbnail 5
Voice Assistant Case 3D Printer File Thumbnail 6
Voice Assistant Case 3D Printer File Thumbnail 7
Voice Assistant Case 3D Printer File Thumbnail 8
Voice Assistant Case 3D Printer File Thumbnail 9
Voice Assistant Case 3D Printer File Thumbnail 10

Voice Assistant Case

DaveDeluxe avatarDaveDeluxe

November 19, 2024

makerworld-icon
DescriptionCommentsTags

Description

This is a case for a Raspberry Zero which is equipped with a ReSpeaker2 Hat and a loudspeaker.
This device acts as a Home Assistant Voice satellite / Rhasspy satellite.

The lid is covered with speaker fabric and has a button that presses the on the ReSpeaker2.
Due to the recesses on the back it is possible to connect a USB dongle and an external loudspeaker in addition to the power cable.

Simply apply a little glue to the lid and stick the fabric on. Then place the lid on the housing and, if necessary, use a thin screwdriver to push the excess fabric into the gap.

The following speakers are provided:
Large Hole spacing 63x24mm - Case_L
Small Hole spacing 36mm - Case_S

Deutsche Version:
Hierbei handelt es sich um ein Gehäuse für einen Raspberry Zero welcher mit einem ReSpeaker2 Hat und einem Lautsprecher ausgestattet ist.
Dieses Gerät dient als Home Assistant Voice Satellite / Rhasspy - Satellite.

Der Deckel ist mit Lautsprecherstoff bezogen und besitzt einen Knopf welcher den auf dem ReSpeaker2 drückt.
Aufgrund der Aussparungen auf der Rückseite ist möglich, neben dem Stromkabel auch einen USB-Dongle und einen externen Lautsprecher anzuschließen.

Der Deckel wird einfach mit etwas Kleber benetzt und der Stoff aufgeklebt. Anschließend den Deckel auf das Gehäuse aufsetzen und ggf. mit einem dünnen Schraubendreher den überstehenden Stoff in den Zwischenraum drücken.

Folgende Lautsprecher sind vorgesehen:
Large Lochabstand 63x24mm - Case_L
Small Lochabstand 26mm - Case_S

License:

Standard Digital File License

Related Models

3D boxes to your dimensions preview image

3D boxes to your dimensions

Perinski profile image

Perinski

5,053

Home Assistant Voice Preview Edition Enclosure preview image

Home Assistant Voice Preview Edition Enclosure

Home Assistant profile image

Home Assistant

221

Esphome Voice Assistant Speaker preview image

Esphome Voice Assistant Speaker

_nesmi profile image

_nesmi

849

Motorised Vertical Blind preview image

Motorised Vertical Blind

paraglider_nut profile image

paraglider_nut

4,925

Fabric Home Assistant (Wyoming) Satellite Case (based on Pi Zero 2W) preview image

Fabric Home Assistant (Wyoming) Satellite Case (based on Pi Zero 2W)

Tannis Root profile image

Tannis Root

53

Home Assistant Voice Preview Edition Enclosure preview image

Home Assistant Voice Preview Edition Enclosure

Open Home Foundation profile image

Open Home Foundation

196

Motor on a roller blind preview image

Motor on a roller blind

nidayand profile image

nidayand

4,144

Home Assistant Voice Assistant - Wyoming Satelite preview image

Home Assistant Voice Assistant - Wyoming Satelite

Ernesto Ponce profile image

Ernesto Ponce

101