Christmas Ornaments - Meshed Bell

Commercial license available on Patreon. Full collection on my profile:

Another meshed Christmas Ornament, shaped like a bell. While it looks just as beautiful without, if you place an electric tea light inside, it will cast stunning shadows and create very atmospheric lighting.

For assembly, simply screw the threaded ring into the base until it sits firmly, then lightly screw the bottom into the upper part. The clearances in the base are lower, so it shouldn't loosen on it's own. If it does, you can consider adding a drop of glue to fix it permanently, but I never needed to do this.

There is a stand option available. The hook is pressed into the base, if it doesn't fit, there are 2 options with higher clearance.

It could be printed without supports, but I added some very light manual supports to prevent sagging of the bridges - it should be very easily removable. The multicolor print requires just a single color change. If you don't have an AMS, I added a profile with a pause so you can manually change filament.

If you like this design, check out my Christmas Collection! https://makerworld.com/en/collections/2899118-christmas-decoration

Commercial license available on Patreon and MakerWorld!