December 1, 2023
Description
Yet another drill bit stand. This stand has been optimised for my needs and includes 0.5mm steps from 1 to 10mm, a very common range. The drill bit sizes are labelled on the stand’s side in large numbers so that they are easily seen.
The drill bit hole diameters have been tweaked to print cleanly, ready for use. Though, your printer experience may vary, hence a small amount of attention maybe needed to fine tune the hole diameters to ensure a good fit. Just use the drill bits to carefully adjust the hole size to match the level of snugness fit you prefer to work with. Keep in mind with all plastic drill bit stands, over time the holes do loosen up a little more.
I hope that you can find this print useful, too. If so, you can support my work by buying me a coffee …
Buy Me a Coffee
Remember to leave a comment, perhaps a like to keep me enthused to make more. I have a 100+ published designs. Do check them out.
My print is made with 1.75mm Bambu Lab PLA Tough+ Orange and White filaments, with 0.4mm layer height on a Bambu Lab H2 Series printer. Print supports are not required.
Both print profile and the individual STL files are included for download.
01/06/2026 | Drill bit size labelling increased in size to improve print quality and be more readable. Drill bit size Labelling no longer an extrusion. This prevents the text from being broken off. |
Q: Why is there a 3MF download that is different? A: Non-designer print profiles are not supported nor maintained by the designer. Hence, when I do a design update, these non-designer profiles become out of sync and won’t match. Use the non-designer print profiles with care as I don’t support them. |
License:
Standard Digital File License
Wiseone
