Panda Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.63x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 2.2mm

Filaments Used:
ABS Sunlu Red Transmission Distance: 5
ABS Sunlu Black Transmission Distance: 0.5
ABS Amazon Gray Transmission Distance: 3
ABS Overture Orange diamond Transmission Distance: 6.5
ABS Bambu White Transmission Distance: 5
This print uses 5 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Red
At layer #13 (1.12mm) swap to Black
At layer #15 (1.28mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Orange
At layer #21 (1.76mm) swap to White for the rest.

Boost MeGrazie!