Japanese inspired Lamp

A lamp inspired by Japanese lanterns and patterns. You can use the puck light from the Bambu light kit or you can use one similar to the one in the picture from amazon.

The top is attached to the main body with magnets and the shade just slides in and lays into a groove. The magnets 6x2mm depending on your printer tolerances if the magnet is loose you can put a dab of glue into the hole before placing the magnet into the holes on the main body. For the magnets that go in the lid they stick fine because the are close to the metal build plate. The legs are attached with the pegs depending on the printer if they don't fit tight you can use some glue.

If you just download the stl. the way i did the shade was only 2 walls so the outer wall in my print profile was changed to .45mm