Voronoi Snowman

Finally found a use of the tree supports!  Wrap fairy lights around them to place inside the snowman!  

Basic snowman with voronoi texture (my favorite one). Very strong and easy to remove the customized supports. I didn't put supports inside as I wasn't worried about any stringing that might happen in there. (I am test printing it now with no supports.) It can be scaled to maximum height allow and all the way down to very small. I provided one with and one without a scarf. Working on adding a wreath and arms. I also provided one that utilizes multiple colors but i don't recommend using it unless you really want to. I did a very small print with some color but due to the voronoi there would be 100s of changes if you try to print the multi-color version. Every piece accept for the hat (that I used the paint color too) is a separate object so it's easy to color as you wish. Hope you enjoy!

And note, the lights i used are not very high quality or have many LEDs, It could be much brighter but that's all I had.

Large Snowman - Translucent Elegoo PETG on P1S with Frostbite Plate

Medium Snowman - White Kingroon PETG on A1 with Frostbite Plate

Small Snowman - Various Filaments on A1 with Frostbite Plate