November 23, 2024
Description
Project: Bmw F10 535i
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x101.44mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Ash Gray
At layer #20 (1.68mm) swap to Ivory White for the rest.
License:
Standard Digital File License
Tobi1266
