A1/Mini Extruder Cover (trapezoid pattern)

Boost MeThank you for checking out my design :D

Important: make sure your build plate is clean, the first couple layers of this print require good bed adhesion.

This should be straight forward print, no support needed. I printed the black one on a Bambu SuperTack plate, and the white one on stock texture PEI plate. A build plate with fine texture would be best, for hiding the lines on the first layer.

========================================================================================

If you like this design, I also made a motor cover with the same pattern - 
A1: https://makerworld.com/en/models/1486549-a1-x-motor-cover-trapezoid-pattern#profileId-1553245
A1 Mini: https://makerworld.com/en/models/1484775-a1-mini-x-motor-cover-trapezoid-pattern#profileId-1551005