Cobra Kai (HueForge)

Project: Cobra Kai.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 187.59x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Yellow for the rest.

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.

Boost MeBoost Me (for free)

Dir gefällt mein Modell?
Dann würd ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen Dank

Do you like my model?
Then I would be very happy if you supported me with a free boost token. Thank you very much