November 24, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments. Substitute as needed.
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Orange
At layer #10 (0.88mm) swap to Yellow
At layer #16 (1.36mm) swap to Black
At layer #20 (1.68mm) swap to Beige for the rest.
License:
Standard Digital File License
Corp
