Half faced Famurai/Hanya woman

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.6mm and the Actual Depth is 2mm

Filaments Used:
PLA INLAND RED Transmission Distance: 3.7
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with RED
At layer #32 (1.4mm) swap to Black
At layer #35 (1.52mm) swap to Jade White for the rest.

I used a shimmer gold PLA for a buddy's preference. But use whatever color you like.