AMS First Stage Feeder Cover

This is a cover for the first stage feeders in the Bambu Lab AMS. It covers the whole visible gray body and is fully reversible. Simply apply on small spots double-sided adhesive tape on the inside of the cover (on the rear, left and right side) and slide it on.

Attention: Space between the covers is ~45,5mm

The wall of the cover is 1mm thick. You have to check if your silica dry box will fit between the first stage feeders with this cover.

I uploaded a narrower version of the “SPILLPROOF AMS Desiccant Box - ROUND Hygrometer” from AeonJoey. It is the Narrow, middle 45° Version.

• Fully reversible
• Printed in PLA
• No supports needed - printing upside down
• Printing above 0.16 mm is not recommended – at 0.20 mm the walls shift a little

I would be happy if you leave a commend with a photo after you print the cover 😊👍