Python AMS First Stage Feeder Cover

This is a cover for the first stage feeders in the Python AMS (from the designer humebeam; ). It covers the whole visible gray body and is fully reversible. Simply slide it on. It will sit very well on its own on the front module and has also two little pins to hold it in place.

Attention: Fits with the Version 1.03 - it seems to be, that with the version 1.04 there is a little gap, visible from the sides which I have to remodel

Due to the tight dimensions and variations in how everyone screwed the first stage feeder on the front module, the covers may hang down a little and not completely cover the body. The cover is designed to only slightly hug the first stage feeder and rest mostly on the front module.
In this case, take some double-sided tape and use it to secure the cover to the first stage feeder.

• Fully reversible
• Printed in PLA
• No supports needed
• Printing above 0.16 mm is not recommended – at 0.20 mm the walls shift a little

I also made a cover for the first stage feeder in the stock AMS - here you go

I would be happy if you leave a commend with a photo after you print the cover 😊👍