set of 4 dragon fantasy bookmarks

Set of 4 fantasy dragon bookmarks, choose the one you like best and print it in just over an hour or print them all. They are in separate files for more convenience.

Project: bookmarks dragon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51.03x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with negro
At layer #12 (1.04mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Beige
At layer #23 (1.92mm) swap to White for the rest.