超简易P1打印机AMS供料管磁吸快接

超简易P1打印机AMS供料管磁吸快接，打印时间短，无需支撑

需要购买外径10mm的磁铁，厚度4.7mm，最好买图片中内控有倒角的，磁铁安装时需要敲几下进去

另外还需要PC4-01(贯穿)气动接头，模型没有设置螺纹，气动接头安装时用钳子夹住气动接头，在火上稍微烤一下螺纹就可以很轻松的拧进去了。

The P1 printer AMS feed tube magnetic fast connection, short printing time, no support required.

I need to purchase a magnet with an outside diameter of 10mm and a thickness of 4.7mm. It would be best if the magnet in the picture had an internal chamfer. The magnet needs to be tapped in a few times when installed.

Additionally, you will need a PC4-01 (through) pneumatic fitting. The model does not have threads, so when installing the fitting, you can use pliers to grip it and slightly heat the threads with a flame to easily screw it in.

为我助力