A10 Blueprint

Project: blue print
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
Start with Marine Blue
At layer #10 (0.88mm) swap to Ice Blue
At layer #18 (1.52mm) swap to Jade White for the rest.