Wall mounting for "AMS" & "AMS 2 Pro"

Angled wall mounting for “AMS” & “AMS 2 PRO”

 

Update 31.03.2025:

Version 3.2:

• Tolerance of the 2-piece holder has been reduced to ensure a better hold of the two parts
• another one-piece print version has been added for the H2D

• also compatible with the new AMS 2 Pro!

 

Update 03.02.2025:

• Description adapted
• Added print profiles for accessories
• I have removed the print profile for version 1 & 2 after some consideration → the current version 3.x is flatter and the filament rolls off better - in addition, the current & future attachable accessories are only compatible from V3 (if someone still needs the old print profile, please feel free to contact me!)

Version 3.1:

After a number of community comments, we considered creating another flatter version. The angle was changed from 35 degrees to 20 degrees and more distance to the wall was created. 

 

This made the model too large for the printing plates. I created a coupling point to get the model onto a plate. The connection can easily be glued afterwards. 

 

        

With the smaller angle, there should be no further problems when unrolling the filament. I have already replaced my holders with the 3rd version and am very satisfied.

The base plate and mounting holes have of course remained unchanged. No new holes need to be drilled!

 

Furthermore, a guide for the PTFE tube was inserted. Thus, the tube can now be laid cleanly.

 

 

 

 

Accessories: 

(all print profiles can be found separately above ^^)

 

Honeycomb insert:

 

The variety of hooks, holders and co. is almost endless 😁

… you have the choice!

 

 

 

Extension AMS wall mounting:

 

Base plate for attaching the accessories.

Printed in 2 parts, it is simply plugged together in the middle. Gluing is not necessary!

 

Installation is also completed in just a few seconds:

 

 

AMS plate holder:

 

The plate holders are simply inserted into the base plate.

Available for 3 & 5 print plates.

 

 

 

 

Drawer carrier :

 

 

Drawer system with 2 drawers for tools, accessories and co.

Optionally, individual inserts in different sizes can be used.

The lettering is of course freely adjustable in the slicer.

 

 

 

 

Do you have any other ideas or wishes? Please let me know 😊

 

 

 

 

 

 

Original description of version 1:

 

If you want to mount your AMS on the wall and still have easy access to it, try the angled bracket.

 

Due to the 2 bars in the model, it currently fits all 3 AMS versions. Whether 3 chambers with different dimensions or the newer design with 5 chambers.

 

 

Due to the adapted width of the holder, the original feet of the AMS stand up perfectly.

 

 

The cable and PTFE tube can be easily routed down behind the AMS.

The lid stays open on its own without having to be fixed and still has enough space to the wall to prevent damage or scratches.

 

 

If you need a longer AMS cable, you can buy it HERE or in the Bambulab Store.

 

 

If you like my models and profiles, you can support me with these options:

• Leave a Like 👍
• Leave a comment ✒️
• Download the file ⤵️
• Boost the model 🚀
• or buy me a coffee ☕😊

 

This model & print profile as well as the finished print may not be used for commercial purposes. Unless, of course, you are in possession of an active license (offline or online). 

MembershipCommercial license available for sale via MakerWorld.

Have fun printing 😎

 

For more models, please have a look at my profile…