Gingerbread Star Wars TIE Fighter Kit Card can also be used as a Christmas Tree ornament. Solid wings or one with a “bite” are available to suit your preference. Also contains a version with a ring for hanging and without the ring.
The Double Wings Body (GingerBreadTieFighter_Parts_Body(A) DoubleWings) allows you to print 4 wings and place them back to back for icing goodness on all sides. You will need to print the parts separately to do the double sided wings. Double wing parts only print profiles for 2 and 4 colors have been added!
NOTICE: if you're adding and printing double “Bite” wings yourself, remember to mirror one of them in the slicer.
A filament swap can be done around 1.8 mm up to add some detail to the cards. Check your slicer for the proper swap height.
Individual parts are included so you can print the model without the sprue to save plastic if desired. Parts are now labeled with the letter from the instructions.
A pdf of instructions is included to print and hand out with the cards if they are given as gifts or stocking stuffers.
Good bed adhesion is a must for the details to print properly. A little glue stick for extra stick may be needed if you're having trouble.
Z height may be adjusted slightly up or down if parts are too tight or too loose from your printer.
Fixumdude
