Metabo TS254M - Miterbar

This was designed to fit my Kobra 2 Pro diagonal, which brings it to 290mm. 12x7mm to fit the Miterslot with space underneath for good sliding capabilities. 3,6mm Countersunk Holes for small 3,5mm Screws.

Printed in White Meta PLA from JAYO

• Potentially Mouse Ears on the ends (did mine in orcaslicer)
• 0.2 - 0.28 Layerheight (With 0.4 Nozzle)
• No Supports
• 20- 30% Infill for strength
• 4-5 Perimenters

To Mount it to the Sled i used the well know method and spaced it with some M6 Nuts so it petrudes a small bit. then i used some doublesided Tape to fix it and the screw it. so this is non permanet and can easily be uninstalled and reused.