SuperMario Modular clock （Desk clock &wall clock ）

This is a modular clock that can be used as either a desktop clock or a wall clock.
If you encounter issues with the tightness of the gears, you can adjust the X-Y hole size compensation settings.
I have designed several Mario-themed accessories, but you can also DIY and design your own accessories.
The clock's hour marks can be customized with various styles combined with D5mm4mm cylinders.
Alternatively, D52mm magnets can be used as magnetic accessories. Please pay attention to the direction of the magnetic poles.
The minute and hour hands can be inserted into the gears with various patterns combined with 4mm*2mm cubes (the recommended length is around 8mm, depending on the actual pattern).
If you're not sure how to create your own patterns, you can use the generator in Makerlab for this part.
The thickness of the patterns should be less than 4mm.
I used a compass standard movement for this clock.
If you have purchased the Bambu MH011 kit, you can provide me with the shaft size, and I can add the corresponding configuration.
If you have any good suggestions, please leave a message for me. Thank you.
It can be printed in a single color and then painted with pens.
 

这是一款模块化的时钟。是桌面时钟也可以是挂钟。
齿轮如果出现松紧问题，可以设置改动一下X-Y洞口尺寸补偿。
我设计了马里奥风格的几个配件。你也可以DIY。自己设计配件。
时钟的刻度可以选择各种样式结合D5mm*4mm的圆柱体组成。
也可以使用D5*2mm的磁铁作为磁吸配件。注意磁极方向。
分针和时针可以用各种样式的图案结合4mm*2mm方块体（长度根据实际图案建议8mm左右）插入齿轮。
图案如果不会自己制作的朋友。这部分可以使用Makerlab的生成器。
图案厚度需要小于4mm。
我使用的是compas标准机芯。
如果购买了Bambu MH011套件的朋友可以提供转轴尺寸，我可以添加配置。
如果你有什么好的建议，也可以给我留言。谢谢。
可以单色打印，用笔上色。
The installation process is relatively simple, and the step-by-step guide is provided below:

安装比较简单，步骤图如下：

Boost MeYour support is my greatest motivation. Thank you for your encouragement and assistance!