Bambu Lab A1 Christmas Ornament

STEP 1

STEP 2

STEP 3

Remove supports

The print head will seem stuck to the rail. Free it up by flexing the rail carefully. Then move the print head side to side to loosen it up.

Snap in Print Head Rail to the chassis. Come in at a slight angle and into the right side of the vertical upright.

(1) Push firmly till you feel it go in. (2) Then snap it into the other vertical upright.

STEP 4

STEP 5

STEP 6

Insert the flipper onto the end of the rail. This part is keyed and requires some force to snap it in.

Slide in the print bed into the keyed slots.

Slowly Insert the back cap into the slot. Look for the UP arrow on the inside of the cap .

STEP 6

STEP 7

STEP 8

Slide in a piece of filament trough the hole on the Z axis rail. Then into the bottom of the printer base.

Finish off the filament into the print head hole.

Use a string, shoe lace, or more filament to hang it to your tree.