Taverns of Tiefenthal Board Game Insert / Organize

If you want, you can help me with designing inserts by donating here:
https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Update 21.05.2024 - version 2.0:

• I replaced ALL the files, that is pretty massive update, old files are in Version 1 archive,
• insert no longer supports Unserfamily keg dice holder - in my group it was fun at first, but after some time only 1 keg dice holder was not enough,
• at least 250g lighter - previous version with my current settings - 1.25kg, new version - 990g,
• 20 models resulting in 41 items in 1st version vs 13 models resulting in 27 items, insert simplified by a lot, resulting in easier teardown,
• card holders updated to my latest design - it's a lot easier to take and put back cards,
• schnapps and signatures holder now has a cover,
• removed the need to use supports - insert is support-free,
• removed the need to use magnets - holders updated to use my latest cover design,
• player dashboard enforced a bit and split into two files (instead of 3) - it doesn't need to be glued, but it does require a larger print bed - at least 227 x 239,
• lid lift completely removed, in fact there is a bit more space left (around 2-3mm),
• replaced description and photos.

Important Notes:

• Clearence for holder covers is very small - 0.2mm horizontal. Please print the smallest holder and cover for it to check if it fits, if not you may need to calibrate printer or enlarge cover a bit (adding 0.2-0.4mm to the width in the slicer should be enough),
• Clearence for Dashboard joints is 0.2mm, you may need to sand it down a little.

Supports:

• vertical storage,
• Open Doors expansion,
• sleeves 70 micron - this is mainly designed for 70 microns sleeves (I use Sloyca). 

This insert features:

• player holders - everything except coasters, everything has it's own space. I think it should there is enough space for custom markers (like small beer mugs etc.). Under main card compartment there is space for 3 cards from modules. During the game you can use main card compartment for storing your deck,
• player dashboard - for storing assembled tavern,
• market cards holders - one main card holder for cards 4-6, few other for 1-3 cards,
• guest cards holders - one for noblemans, one for mages, one for 3 beer worth cards and under it - all other guest cards,
• module components holder - for modules components and 4-6 cards holder,
• schnapps and signatures holder,
• room upgrades and markers holder - for everything else,

Requirements:

• about 990g (depends on your settings, I printed with 15% gyroid infill, 2 walls, 5 top and 3 bottom layers), 
• at least 227mm x 239mm print bed.

Instructions:

Supports - no supports required.

• every file ended with xX (for example x16) - print X times (in given example - 16 times),
• Player_Dashboard_Left and Right - you will need to assemble the dashboard, it's fairly easy but do it slowly - 2 of the joints from the right part needs to go over, 2 under the left part. It does not need glue, it's very strong without it, but you can add it if you want (I didn't),
• refer to pictures how to organize the box.

What future holds:

• This insert is done, I don't think that I will come back to it, but who knows ;).

Enjoy!