DJI SDR Transmission Hard Case
Read this before printing:
- The box is designed to be printed in PETG, although you can keep all the 3MF settings and change the filament over to PLA for the main parts.
- The assembly requires (6) x M3x35mm bolts/screws.
- Use TPU of any kind including the new TPU for AMS (recommend for easy printing) for the ‘Seal’ and ‘Lid Insert’ - this is important as the insert of the lid and seal needs to compress a little when closing the lid.
- You can glue in some foam in the lid instead of the TPU if you wish to save time or dont have TPU on hand (As pictured).
This case is designed to accomodate the original boxed accessories and a few extras.
- SDR units x 2
- DJI SDR mounting brackets x 2
- Sony NP-F750/F-730 battery (4400mAh) x 2
- SDI Cable
- HDMI Cable
- Small Magic Arm
- USBC Cables
Boost MePlease consider boosting my model if you like it
3D Film Parts
