水壶架收纳的自行车停车支架 Bicycle parking bracket V2

一种公路车自行车停车支撑，适用于公路自行车在户外或室内临时停车，支架在骑行途中可以收纳在水壶架上

完美适用于迪卡侬RC100 V1 及 V2

其他品牌自行车，只要尺寸需要符合下图所示，不偏差太多，基本均可使用，你也可以根据自己的自行车曲柄尺寸对打印文件进行缩放。

注意！如果需要调整长度，仅能进行长边的缩放，否则与水壶架配件会出现配合问题。

 

打印配置文件已上传，推荐使用本人上传的打印配置进行打印，使用更少的材料和更易拆除的支撑。

Boost Meif you like this model please boost me

A road bicycle parking support, suitable for temporary outdoor or indoor parking of road bicycles. The bracket can be stored on a water bottle rack during cycling

Perfect for Decathlon RC100 V1 and V2

Other brands of bicycles can be used as long as the size meets the requirements shown in the following figure without too much deviation. You can also scale the printed file according to your own bicycle crank size.

be careful! If length adjustment is required, only the long side can be scaled, otherwise there may be compatibility issues with the kettle rack accessories.

 

The printing configuration file has been uploaded. It is recommended to use the printing configuration uploaded by myself for printing, using less materials and easier to remove supports.