December 7, 2024
Description
A cute gingerbread house Christmas tree ornament that almost looks like a frosted cookie that you could smell and sink your teeth into! Just don't, it's plastic. But looks great!
Boost MeIf you enjoy any of my prints, please consider a boost! Thank you!
For other festive holiday models please visit https://makerworld.com/en/@Hockey_Dad
Scale up or down on X/Y axis only. DO NOT adjust Z height!
If you get “floating regions” warning, that can safely be ignored and does not required supports.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 110x128mm in size
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #16 (1.36mm) swap to Jade White for the rest.
Any questions or requests, please ask!
Please leave a review!
License:
Standard Digital File License
Hockey Dad
