Soldering wire holder

Hi Makers!

 

I sometimes have to less helping fingers and so I created this simple, but very helpful soldering tool that can hold a variety of different wires or cables properly in place while you are welding them together or cutting them to the right length. (In this case it's recommended to print 2 or more) I have already uploaded a first version you can find on my profile, this is the much cleaner, but maybe less versatile version. Feel free to choose your preferred model.

Like the other one, there are fixtures for very thin cables down to 1mm up to thicker household cables of about 4mm, you just need to press them into place in the fitting location;-) The distance between the guides has also been enlarged so you have more space and a potentially bigger work area.

On the bottom there also are implemented screw holes to tightly secure it to a table etc., you can see it in the pictures.

The default material selected in the print profile is PETG, but you can also find a suitable PLA profile in the print profile section which has been tested too. Due to the bigger space the evoked heat won't affect the structure of the model in normal scenarios, but you easily may print it in a different material.

Feel free to scale it to your individual needs, as this way it can potentially hold even thinner or thicker wires.

I hope you enjoy my work and have fun and success using it!

 

Best regards

😃

Boost MeIf this model helped you, I would be so glad if you leave me with a boost😃