Universal Ornament Display Stand

A nice and basic ornament stand that work for many different sizes of ornaments.

Fairly quick print to display your ornaments without a space on the tree.

Could likely be used for other things as well as long as they are not too heavy.

Prints in 2 pieces and the hanger pole slides into the base with a secure friction fit.

The hanger pole prints with a small support which helps adhesion as well as adds a bid of txture to help the friction fit.

There is also a brim for adhesion, but it comes of very clean like no brim used at all.

Ornament Size:

• Tested with ornaments up to 125mm in diameter with a height of 135mm from bottom of ornament to the hook.
• Will work with slightly larger ornaments depending on weight since the hanger flexes slightly
• Will work with any smaller ornaments

Hook Size: 3.5mm diameter

Larger Ornaments?

If you scale the z-height of the base it will still fit with the hanger and will give you more clearance for larger ornaments.