Functioning Lighthouse

@Kijai did a fantastic looking model of a lighthouse and then @Jeff made it better by separating in multiple pieces. But yet, something was missing….

So I made a hole down the tower to fit a 3V LED-cell and some wiring aswell as hollowed out the house to fit 2xAA batteries to make this lighthouse actually be a lighthouse.

Thanks @Jeff for the exploded pictures with the parts you've created. 
Made it easy to show where the LED-cell should be attached.

I've separated the STLs into three. 
One to be printed in white, another in red and lastly in black. 
Then just fit the pegs into the holes of each part and glue them togheter.

The file name shows which color to be printed in… but in Swedish so here comes a translation of the colors:
 

vit = white
röd = red
svart = black
 

If you print with the sizing I've thrown into the STLs your finished lighthouse will be 20cm tall and the base is 8cm by 8cm approximately.
 

I printed every piece without support nor brim.
 

Have fun!