Ceiling Tote Storage Rack

Need extra space? I did. I decided to design these so I can have them hanging from the ceiling and have more room on the floor and walls. I printed these in PETG and PLA and all have been fine so far. You will want to use washers, it can support up to 15mm washer. If you need extra space at the top for a large lid bin, you can use scrap wood as a spacer or increase the Z, although that increases the Z height everywhere.

Its about 40mm tall, 70mm wide, 120mm deep (~1.5" x 2.75" x 4.7")

There are also holes in the model that enable you to stick a dowel rod in them to help align the tote hangers, these should be removed before sticking a tote between them as they could get in the way.

Please make sure these are screwed into a stud or you have used proper drywall studs that are printable or can be purchased at a hardware store. Use at your own risk. I created this for myself, please do your own research before using this as i made this specific to my environment.