X1C - P1S Toolbox // Complete hotend edition

X1C - P1P - P1S TOOLBOX // Complete hotend edition

/ Print-in-place

Just launched a next-level toolbox designed specifically for the Bambulab X1C and P1S! 🧰⚙️ Built to house all the tools that come with the printer — and yes, it even fits fully assembled hotends with ease. Whether you're doing routine maintenance or a quick swap, this print-in-place toolbox keeps everything tidy, accessible, and locked in.

If you're rocking an X1C or P1S, this is the upgrade your workspace deserves! 💬🔥

THINGS TO KEEP IN MIND

• When closing the latch, it reaches is designated ‘closed’ state by deforming. If you choose to print it from a more rigid material you might need to file it to reach perfect closing. If you print it from a more flexible material like PETG, your print should work without any filing. If you find closing difficult, file the surface shown below.

• There are multiple overhangs where support used, but sometimes they are hard to spot. Pay attention to these places, because missing to remove support can cause headaches.

• The small parts on the photo above you can see small latches for the container covers. You can insert them by slightly bending the container covers ( gently:D)

If you are printing the models on non-Bambulab printers please bare in mind the following:

• Use support at the inner cavity of the small enclosures lock and at the logo seating
• Prevent using any support on the hinges and on the hinge of the lock.
• Increase infill at the hinge section and its close proximity.