Hue / Govee light Bar Arms for aluminum profile

These are the arms to mount Govee(H6056) or Hue lights on a monitor stand.

The light bar adapters will be posted separately.

It is designed to be mounted with 8 m6 t-nuts. You will need 4 12 or 16 mm m6 bolts and 4 30mm m6 bolts.

For each arm joint you will need a 60mm m6 bolt and m6 nuts .

I recommend that you use washers in the arm joints.

You can use 8020 slot cover to hide the wiring.

There is a right and a left arm in case you want to have your tightening nuts in a preferred orientation

Plate 6 is some spacers to raise higher than 32cm I would not us mor than 6 cm in spacers.

I only posted the project file (3MF) because any negative parts will be lost in Bambu Studio when I attempt to mesh them.

This is my first upload so be gentle!

Govee H6056 mounts

Govee (H6056) aluminum Extrusion mounts by steliosdroid - MakerWorld