AMS Lite Pivot Wall Mount

Boost MePlease consider a like or a boost token for me to show support - I would greatly appreciate it!

I wanted to wall mount my AMS Lite and really liked the idea of a pivoting mount so it would be easier to replace filament spools.

@egil.opsahl did a great job of modifying some of the parts using Fusion 360. He was nice enough to provide me with the .f3d file (Thanks again!) and I decided to modify it further:

• I wanted to use the original 5/8" bolt so I changed the holes back to accommodate.
• I found a printable 5/8" bolt, washer, & nut using Easy Bolt (https://www.thingiverse.com/thing:6308320). Thank you to jbruce12000.
• Strengthened the pivot component further and removed from overhangs so there were less support needed.
• Changed the screw holes on the wall mount plate from 4 to 2. I wanted to ensure that the 2 would hit the stud on my wall. I used 3" construction screws to mount the plate.

The print profile uses the .20mm Strength profile with Gyroid infill. The 5/8" bolt I used 100% infill just to be sure it was stronger - perhaps overkill? This is my first ever post/remix and have really enjoyed my A1 so far. Thank you,