Sylvanas, Lich KIng's Helmet Stand - WOW

Blizzard never let Sylvanas wear the Helm of Domination, so I tried it.

This is a helmet stand for the Lich King helmet, if you don't have a helmet, you can print it here: Lich King's Helmet（Life Size）

Sylvanas' face can be used in another helmet stand: Arthas，the Lich King Helmet Stand（Life Size）

but, the Arthas‘ face can not be used in this one, so it is posted separately to avoid confusion.

Red-KC006 magnetic light can be placed inside the eye, not a must.

However, it is recommended to put lights on and turn it on to illuminate the inner fill with a reddish effect similar to the banshee form. The dark tear area of the face has been made raised for easy colouring.

About Print Profile:

• Sylvanas' face is preset with the necessary supports, the hair base does not need support.

About Assembly:

• Assembly is simple as shown. The only thing to noice, if you use PLA, you need to fit one side of the face first, then open the other side of the hair slightly to fit the other side of the face.
• The protrusion at the top of the stand can be recessed into the groove at the top of the Lich King's helmet to reduce wobble.

• Another of my creations, the Horde Elf Christmas Hat, also can be putted on this stand.
• The eyes have a protruding dot, which should face outwards and be inserted into the eyes, the slots have been optimised for a size that is not too loose or too tight, making it easy to remove and replace the battery.