Utility Knife - F1 Gen.2

Boost MeThanks for the Boost, we appreciate all of the support!

F1 Gen.2 - The Revolution

After the overwhelming success of F1 Gen.1, with thousands of downloads and prints, we listened closely to your feedback. 💡 We went back to the drawing board and redesigned everything from the ground up to bring you a knife that’s even more robust, precise, and easy to print.

F1 Gen.2 is the result of rigorous testing and finely tuned tolerances. Blade changes are now safer and risk-free, thanks to a stronger, optimized structure. ✨ With a sleek design, ultra-

light weight, and an improved locking mechanism for maximum reliability, it’s built to perform.

Try it out and feel the difference! 🔥
 

Product Review by 3D Printing Nerd
We’re beyond excited to share that Joel, on his YouTube channel 3D Printing Nerd, has reviewed our knife in his latest video! 😍 It’s an absolute honor to see our hard work featured on such an inspiring channel.

👉 Don’t miss it! Go check it out and let us know what you think! 💬

 

 

PRINTING RECOMMANDATIONS:

• Print with a 0.2mm Nozzle;
• Print with a layer height not taller than 0.2mm;
• In BamsuStudio (and most other slicers) → Avoid crossing walls: ON (to reduce stringing);
• In BambuStudio (and most other slicers) → Order of Walls: Outer/Inner (For better surface finish and tolerance);
• Print with 100% Infill;
• Print with at least 3 Perimeters/Walls.