Rotating drawers desk organizer with 4 drawers

This is my rotating drawer desk organizer with 4 drawers!

Revision note:

06.11.2025 → There were reports that the drawers were too close together. In this new print profile and stl- file, I've adjusted that and increased the distance to 1.4mm. This solves the problem and ensures that the drawers no longer rub against each other. Also i added numbers to the axis and the drawers. This ensures that nothing will get confused.

This organizer is a nice piece to display the beauty of 3d printing!

The model consists of:

• Feet (4pcs).
• Bottom (1pc.)
• Housing (1pc.)
• Peg for Axis of drawer 1 (1pc.)
• Axis for drawer 1 (1pc.)
• Axis for drawer 2-3 (2pcs.)
• Axis for drawer 4 (1pc.)
• Drawer 1 - 4 (4pcs.)
• Top with eagle inlay or tree of life inlay or without inlay (1pc.)

Print Profile Information:

The print profile contains all possible parts plus top with eagle inlay. The two other top versions you can choose of, can be found in the additional print profiles.

You can be creative by colorizing the model as you like it the most! Show me your beautiful color combinations that you have printed!

Needed Tools:

• screwdriver to install the axis
• your preferred glue

Assembling:

Please read the assembly instructions!

Recommended filament:

PLA or PETG depending on what you have.

I printed the model with PLA.

Hotend: 0,40mm

Print instructions for PLA (my print profile is set up like this):

• layer height 0,20mm
• 3 wall loops
• top/bottom shells 4 layers
• top/bottom shell thickness 0,80mm
• infill 10%
• sparse infill pattern “gyroid”
• Enable support type “normal”, style “default” to support the guiding peg of the drawers

Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.

Bad build plate adhesion is not related to the model.

Take a look at my other models https://makerworld.com/en/u/1597610120

Please leave me a like and a decent rating if you were satisfied, thank you in advance!