Gameboy Fidget Toy

This is my version of a cute little magnetic fidget toy modeled after the original Gameboy. Can be printed on one plate with an AMS without a prime tower. Also have versions where each color is on its own plate or just a single color. No supports required and you just need three round 6x2 or 4x2 magnets and some glue. Just print and follow the simple assembly guide below.

 

For the BOM list, you don't need all three items. You just need three 6x2 or 4x2 magnets (the magnets in the Maker's Beginner Kit are 4x2)

Assembly guide:

1. Insert the three magnets into the top and cartridge pieces. Make sure the polarity of the magnets are correct so that the pieces are attracted to each other. Use a little super glue to make sure they stay put.

2. Insert the slider piece into the cartridge. Use a little super glue if you want to make sure it doesn't move.

3. Place the cartridge into the bottom piece and snap the top into place. Should be a press fit but you can use a little super glue if loose.

4. Glue the rest of the pieces onto the top (buttons, bezel and screen) with some super glue.

   
   
    

Boost MeIf you like my models a boost would be appreciated. Thank you!