GE Digital Clock MagSafe Dock - Remix

This is a remix of the Retro iPhone 16 Pro Standby Mode Dock to fit an iPhone 15 Pro Max in addition to other changes.

Highlights and remix details

• The GE-style dock now fits an iPhone 15 Pro Max
• The MagSafe charger cutout is expanded for a MagSafe 15W charger (the older one)
• The left side finger slot cutout to eject the phone is taller and deeper for easier access
• The left side cavity where the camera sits is now deeper for small item storage
• The right side dial now has a hole cutout to attach either a dial plug or an Apple Watch charger
• Parametric model included to adjust the body to any size iPhone

Required parts

• MagSafe charger (you will need some additional adhesive if using a 25W charger)
• Apple Watch charger (if using the Apple Watch attachment)

Printing notes and assembly

1. On Plate 1, in Bambu Studio or in Bambu Handy using “Select parts to print”, disable the part you won't need for the side dial hole (either the knob.stl or the watch_attachment.stl)
2. If using the Apple Watch attachment, place the Apple Watch charger puck into the attachment, run the cable down the main body, and then plug the attachment into the hole
   1. It's a snug fit so it might feel like the USB-A connector (if you have the older charger) will get stuck but some connector rotation/pulling/pushing will get it through
3. Run the MagSafe charger cable through the hole to the back
   1. You'll need a piece of double-sided tape to hold the charger puck down
4. You may need some adhesives on the bottom to keep the dock from sliding around on a surface

Model customization in Fusion 360

• You can customize the parameters of the main body under “Change Parameters”

• After adjusting parameters, the bodies to export are stored under “Print”