Bookmark Set: Sanrio #2 My Melody and Kuromi

Back Story

My nieces love Sanrio. No age limit to like these lovable characters. I know Hello Kitty, that's about it. Had to consult with the young ones on this one.

Bookmark Set: Sanrio #2 My Melody and Kuromi
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 
 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Dark Gray Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
    At height depth (0.8mm) swap to Dark Gray
    At height depth (1.12mm) swap to Red
    At height depth (1.52mm) swap to Jade White for the rest.

More are available