December 12, 2024
Description
Project: christmas town hueforge_200x142
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x142mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Red
PLA BambuLab Basic Yellow
PLA BambuLab Basic White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to Yellow
At layer #13 (1.12mm) swap to White for the rest.
License:
BY-NC
LK_Pei
