Some “3 TR BL” top right and bottom right pieces were slightly wider than they should have been, these have been fixed - thank you FoxyBlep for reporting this. At the same time, all PETG profiles have been deleted as they were redundant (you just pick your material when you print), and all PLA profiles have had the Aux fan set to 0% to reduce chances of warping. If you are using your own filament profile, please check your Aux fan setting.
Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!
There are framed pieces for a few different sizes:
The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found here and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).
The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a tweakedP1P/P1S/X1C). The middle piece can be found here and I also included this in the print profiles as it is my model.
The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found here, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.
The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found here, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.
The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found here, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.
For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)
If you need HSW help in general, check out the honeycombwall subreddit.
Check out this collection for my other Honeycomb Storage Wall models.
KYZ Design
